This automotive vinyl pinstriping is a 10 year film made from 3M 2080 wrap film series and is a dual cast adhesive-backed film with Controltac for vehicle wraps & accents.
Width configuration is 1/4" top stripe, 1/8" gap & 1/2" bottom stripe totaling 7/8" wide.
Application is best if applied in temperatures between 55 and 85 degrees fahrenheit. All adhesive applications must be applied to a clean surface, free of all wax, oil and grease. Remove back paper liner exposing adhesive. Position striping, being careful not to stretch the vinyl. Lay striping onto the application surface then go over the entire surface gently with an application squeegee to ensure bond. Carefully remove the protective premask by pulling parallel with the stripe immediately after application. To assure a permanent bond please allow at least 72 hours in direct sunlight before washing or waxing.
